Kits

Kit Es9038pro Dac

Output:

• Voltage DC: +1.65 VDC
• Output: Stereo balanced
• Output impedance 50 Ω.

Input: 4 inputs:

1. USB-match with Amanero USB (not included).
2. Spdif- RCA
3. AES/EBU.
4. Optical.

Support: 44,88,96,192,352, 384KHz PCM and DSD 512.

• Supply: Digiltal & Analog supply: All low noise LT3042.
• PCB dimension: 11.5x 18 cm
• PCB thickness: 1.6mm, double layer, 2oz copper.
• Symmetric layout design and signal paths with minimum parasitic.
• Dedicated ground and power rails layout design.
• Two large reservoir decoupling capacitors for power rails.

Parts Compliment includes: all same as image

• ES9038PRO chip.
• CCHD-575, Ultra-Low Phase Noise Crystal Oscillator.
• All Input connecters, Amanero USB (not included)
• All low noise LT3042
• LT1117.

Power requirements:

• Transformer 15VA to 25VA: 2 x 6-8VAC: Talema 70050 or Talema 70060 Or equivalent.

Options:

• LCD Control Kit + Remote
• Chassis for Hq 9038 Tube DAC

Use: HQ-9038 Tube DAC

Control Remote Es9038pro

SPECIFICATIONS: Controls And Remote For DAC  ES9018S ES9028PRO ES9038PRO

Pure I/v Tube For Es9038pro

SPECIFICATIONS: Pure i/V Tube for ES9038 Dac Reference for HQ9038PRO Tube DAC Best design for ES9038pro

The Best Hv Supply Kit

Output: 
positive voltage:
♥ 100-270VDC. 
negative voltage:
♥ 100-270VDC.
♥ Input: 130 V to 350 VDC.
♥ Input Voltage and Min Output Voltage 35V.
♥ The output voltage is controlled by the Vr1.Vr2 variable.
♥ Noise below 10uV.
♥ Very good PSRR reaches 160dB (60khZ - 100kHz).
♥ Output impedance: 0.03 mOhm.
Low Supply: 6 to 12VDC
♥ Filemant Tube: 6.3VDC
Power requirements: 
♥ Hq9038 Transfomer
♥ PCB dimension: 13 x 19cm 
♥PCB thickness: 1.6mm, double layer, 2oz copper.

HV supply kit

Output: 
positive voltage:
♥ 100-270VDC. 
negative voltage:
♥ 100-270VDC.
♥ Input: 130 V to 350 VDC.
♥ Input Voltage and Min Output Voltage 35V.
♥ The output voltage is controlled by the Vr1.Vr2 variable.
♥ Noise below 10uV.
♥ Very good PSRR reaches 160dB (60khZ - 100kHz).
♥ Output impedance: 0.03 mOhm.
Low Supply: 6 to 12VDC
♥ Filemant Tube: 6.3VDC
Power requirements: 
♥ Hq9038 Transfomer
♥ PCB dimension: 13 x 19cm 
♥PCB thickness: 1.6mm, double layer, 2oz copper.

SUPPLY FOR P3